| Homogenizers 實驗室用碾槌式勻漿器
Variable speed motor drives to make the process faster, safer, and more thorough
可變速驅動電機使整個過程更快、安全和徹底
Straight homogenizers for softer tissue
直形勻漿器：適用于較軟的組織
Tapered homogenizers for tougher tissue
錐形勻漿器：適用于較韌的組織
Teflon® resin pestles for grinding softer material with less heat generation and contamination
Teflon樹脂槌：因產生較少的熱量和不易污染，故適用于較軟材料的研磨
Glass reinforced Teflon® pestles for moderately tough tissue maintains features of Teflon®
玻璃加固的Teflon槌：適用于中等韌度的組織
Ground-glass pestles for tougher sample tissue
毛玻璃槌：適用于較韌的組織
Manufactured for precise fit to insure complete tissue disruption
為徹底破碎組織而設計
|
|
直型 POTTER-ELVEHJEM 型均質機
規格
Teflon® 研磨棒
1-5/8 英寸（41.3 毫米）長的 Teflon® 尖端，7 英寸（178 毫米）長 x 3/16 英寸（4.76 毫米）直徑的不銹鋼軸。
軸適合任何列出的電機驅動器上的可調卡盤。
所有軸都經過特殊開槽，以適合 L11 快速更換卡盤。
玻璃研磨棒
10 毫米直徑玻璃軸上的中等磨砂玻璃表面尖端。
S24 整個長度都經過研磨，可以反轉以延長使用壽命。
所有尺寸都可以與 L14 或 L15 柔性握把電機卡盤一起使用。
管
精密鉆孔硼硅酸鹽玻璃。
大約 5-3/4 英寸（146 毫米）長，除了S38，長度為 4 英寸（102 毫米），適用于離心機。
玻璃研杵管的研磨室內壁表面為中磨面。
列出的管徑為研磨部分的近似外徑。
圖表注釋：“容量”是研杵在管內移動時的最大可用液體容量。“間隙”是研杵外徑與管內徑之間的差值。
直研杵和管
錐形均質機
規格
Teflon® 研杵
精密加工的 Teflon® 尖端。
錐形和圓柱形研磨表面。
安裝在 7 英寸（178 毫米）長 x 1/4 英寸（6.35 毫米）直徑的不銹鋼軸上，S61 除外，其軸直徑為 7 英寸（178 毫米）x 3/16 英寸（4.76 毫米），適合快速更換卡盤。
在任一均質器驅動器上安裝可調節卡盤。
給出的杵直徑是圓柱形部分的外徑。
玻璃杵
10 毫米直徑玻璃棒上的磨砂玻璃尖端（S62 棒的直徑為 6 毫米）。
具有中等研磨表面的錐形和圓柱形研磨區域。
所有尺寸均可與 L14 或 L15 電機卡盤一起使用。
給出的直徑是圓柱形研磨部分的外徑。
管
精密孔徑硼硅酸鹽玻璃。
所有錐形管都有溢流室。
玻璃杵管的均質部分內壁具有中等研磨表面。
列出的直徑是圓柱形均質部分的近似外徑。
圖表注釋：“容量”是杵在管中移動時的最大可用液體容量。“間隙”是杵外徑和管內徑之間的差值。
錐形杵和管
VARIABLE SPEED MOTOR DRIVES |
| Glas-Col''s variable-speed homogenizer drives features:
For high-speed operations, the direct-drive shaft is recommended. The geared shaft, on the other hand, generates high torque and lower speeds. The homogenizer drive''s electronic motor controller delivers versatile and reliable performance and maintains speed. This controller also provides:
- smooth rotation and repeatability, reduced motor temperature, and reduced noise thanks to filtered circuitry.
- a switch for reversing pestle direction during homogenizing or allowing either motor shaft to rotate in the proper direction for use with the quick change chuck.
- cord connection to the motor so control can be placed away from corrosive hood environments for ease of access.
Furnished with a 3-jaw keyless chuck and 90-degree clamp.
|
|
Optional Accessories
Flex-grip chucks for glass pestles.
Quick-change chucks for Teflon® pestles.
Flexible drive for safer homogenizing.
Laboratory support stand.
|
Specifications
Lab bench case size: 8"w x 6"d x 3.38"h
Motor size: 4.38"w x 4.38"d x 5.50"h
Finish: Foxtip gray/charcoal |
| Catalog Number |
Description |
|
|
Product Weight (lbs) |
| 099C K54 |
Motor & Speed Controller |
120V |
333/4,000 |
17.0 |
| 099C K5424 |
Motor & Speed Controller |
240V |
333/4,000 |
17.0 |
| 099C K64 |
Motor & Speed Controller |
120V |
11,500 |
14.0 |
| 099C K6424 |
Motor & Speed Controller |
240V |
11,500 |
14.0 |
| 099D A130150 |
Heav-duty lab stand with 3/4" (19mm)
diameter nickel-plated mast. Cast iron base.
Accepts containers up to 16" (406 mm) diameter.
Shaft L=28" or 711mm. |
|
|
12.0 |
|
| |
CHUCKS |
Quick-Change Chuck
- For 3/16" diameter notched pestle rods.
- Allows one-hand introduction and locking of notched pestle rod.
- Permits rapid and convenient homogenizing procedure. Particularly useful where a separate pestle must be used with each tube to prevent cross contamination.
Flex-Grip Chuck
- Flexible, self aligning, slip-clutch.
For glass pestle and stirrer rods.
|
| Catalog Number |
Description |
Product Weight (lbs) |
| 099C L11 |
Quick-change chuck for 3/16" dia. notched pestle rod |
0.5 |
| 099C L14 |
Flexgrip chuck for 10mm glass pestle |
0.2 |
| 099C L15 |
Flexgrip chuck for 6mm glass pestle |
0.2 |
|
| |
FLEXIBLE DRIVE |
The flexible homogenizer drive allows up-and-down motion of rotating pestle in a stationary tube that can be mounted in ice or controlled-temperature bath.
- Accepts the adjustable chucks furnished with the motor drives as well as the L11 quick-change chuck and the L14 and L15 flex-grip chucks.
- Eliminates hand-holding of tubes and pestles.
- Furnished with clamp for holding homogenizer tube and shaft restrainer for top of support stand.
- Fits Glas-Col motor drives or any 5/16"-diameter motor shaft.
- For use with 099C L70 support stand.
- 36" long.
- Convenient for processing several samples: pestle may be rinsed or separate pestle used to avoid sample contamination.
|
| Catalog Number |
Description |
Product Weight (lbs) |
| 099C L73 |
Flexible homogenizer drive for 5/16" dia. motor shafts |
2.3 |
LAB STAND |
| Catalog Number |
Description |
Shaft Length (in) |
Shaft Length (mm) |
Product Weight (lbs) |
| 099C L70 |
Horseshoe-base laboratory stand with 3/4" (19mm) diameter aluminum mast. Accepts containers up to 9" (229mm) diameter. |
24 |
610 |
10 |
| 099D A130150 |
Heavy-duty lab stand with 3/4" (19 mm) diameter nickel-plated mast. Cast iron base. Accepts containers up to 16" (406 mm) diameter. |
30 |
762 |
12 |
|
